Brass Threaded Inserts are part of fasteners used to easily assemble and disassemble materials like wood, plastic, aluminium, rubber, etc. without causing any damage to components and thus improve their reusability.
Depending on the type of fittings and material, the role of brass inserts vary. Brass Inserts comes in various size, design, finish, etc. Most commonly used Brass inserts are
- Male and Female Brass Inserts
- Threaded and non- threaded Inserts
- Polished and non-polished inserts
Among various sizes, m3 threaded inserts are widely used.
Here we are going to discuss step-by-step method to install brass threaded inserts which are used to provide machine screw threading in wood based applications.
Step 1 :
Drill a Pilot hole in the wood using the appropriate drive tools. You can find the right drill size in the Brass Threaded Insert’s specifications.
Step 2 :
Place the Brass threaded Insert’s bottom flush part inside the pilot hole of the wood.
Step 3 :
Top part of insert consist of two grooves for the drive tools to move the insert inside the wood.
Step 4 :
The brass threaded insert should be flush with the wood to consider proper installation.
Step 5 :
Fasten your workpiece to the wood. You need to make sure that the Screw should be long enough for the insert and the workpiece to pass through.
Step 6 :
Push the Screw using appropriate screw driver or drive tools and tighten the workpiece to the wood according to your requirement.
If you want more information on Brass Threaded Inserts Installation methods, then our experts will guide you through your installation.
Also share with us your knowledge regarding Brass Inserts which is not mentioned above.
If you are a Consumer, looking for Brass Inserts then we would like to let you know that Shivraj Brass International is one of the Top 5 Brass Threaded Inserts Manufacturers in India. Feel free to contact us with your requirements and specification of Brass Threaded Inserts.